Revmaster makes the heat box. I am putting one on my engine. At 11:55 AM 2/28/2004 -0500, you wrote: >Hello all, I have a dilemma! I am trying to get a "mature" gentlemen's KR-1 >flying while he and his 82 year old body are still ticking. I need to replace >the propeller but in has a 3/4 inch wood space glued to the back of the >HEGY 52 >x 40 propeller. I can get another propeller but not with the spacer. The hub >is a SAE # 0. Does any one sell, manufacture, or have a spare aluminum spacer >that I can put behind the new prop or...an ideas for me in this >situation? > mr. bill at [email protected] >The engine is a VW1600 with a REVMASTER REV-FLOW carb. >Does any one make or sell a carb heat box for this 2 3/8 inch opening on the >REV-FLOW? Again, any suggestion for this situation will be appreciated! >_______________________________________ >to UNsubscribe from KRnet, send a message to [email protected] >please see other KRnet info at http://www.krnet.org/info.html
Larry Severson Fountain Valley, CA 92708 (714) 968-9852 [email protected]
