Larry and Netters,
Are you using straight isopropyl alcohol or rubbing alcohol which is 91%
alcohol and 9 % water?
Jim Morehead
Cameron Park, CA
Just made reservations for Mt. Vernon, IL. See you there.
on 3/12/04 3:48 PM, larry severson at [email protected] wrote:
> A couple months ago, information was published on how to get smooth wings.
> He said that you should make dry micro ( dry enough to stand up - not
> slump) and apply it all over to a depth of 1/8-1/4 inches and then sand it
> down to level, removing all of the depressions. That was well and good,
> except I was unable to get it to lay down. all I got was a mess. Yesterday,
> I found out what was left out in the information - isopropyl alcohol
> (rubbing alcohol). After you get that super dry micro mixed, add the
> alcohol slowly until you get the consistency that you need for your
> application (runny for thin, soupy for thicker). During the cure, the
> alcohol will evaporate leaving just what you want, a firm sandable micro
> surface that is extremely light and doesn't shrink like Bondo. Made and
> applied it yesterday; sanded it today - WOW!
>
> Larry Severson
> Fountain Valley, CA 92708
> (714) 968-9852
> [email protected]
>
>
> _______________________________________
> to UNsubscribe from KRnet, send a message to [email protected]
> please see other KRnet info at http://www.krnet.org/info.html
