I have just completed the wiring of my elevator trim tab to the rocker switch and LED position indicator. Now I have to decide which way to position the indicator and Led positioned. The mounting holes are cut in the panel and all I have to de is screw them down. I have tried the rocker both ways. Up is up and up is down. Down is up and down is down. I am used to the trim wheel on Cessna where you turn the wheel back to raise the elevator and the Piper where the trim switch is on the yoke and you pull it back to raise the elevator. Now, should I set the rocker switch where elevator up is achieved by pressing the bottom which would be like pulling the yoke back and pressing the top would be like pushing the yoke forward. Confusing? That is why I would like a general consensus of how a panel mounted elevator trim rocker switch should be activated.
Mark Jones (N886MJ) Wales, WI USA E-mail me at [email protected] Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html
