Rick, I have the Diehl nose gear installed. As Bud indicates below, the wheel, tube and tire are available from Wicks. Also, the axel comes with the nose gear assembly. I used a mallet to get the axel through the bearings and it wasn't near as hard as getting the main wheels on their axels. Hope this helps. Good luck.
Dean Cooper Jacksonville, FL Email me at [email protected] See my KR project at www.geocities.com/djramccoop1/KR2_Home.html ----- Original Message ----- From: "Charles Buddy & Cheryl Midkiff" <[email protected]> To: "KRnet" <[email protected]> Sent: Thursday, May 13, 2004 12:48 AM Subject: Re: KR> Diehl Nose Gear Wheel, Tire, Tube, and Axel > Rick, > The wheel I was told to use is sold by Wicks. It's the AZ-1144. The tire is > a Shin 3.40 x 3.00 x 5 part # TR100-22, also available at Wicks. I had to > use a press to get the 5/8" axle through the wheel bearings. > Bud Midkiff > Lynnwood, WA > email: [email protected] > web: http://mysite.verizon.net/res18ums/index.html > > > > > ----- Original Message ----- > From: "Richard Collins" <[email protected]> > To: "KRnet" <[email protected]> > Sent: Wednesday, May 12, 2004 9:12 PM > Subject: KR> Diehl Nose Gear Wheel, Tire, Tube, and Axel > > > > I ordered the Diehl Nose Gear from Dan. He informed me that neither Wicks > > or Aircraft Spruce sells the wheel, tube, tire for the assembly and that I > > should buy it from Janet. > > Does anyone have the wheel, tube, tire and/or axel they would like to > sell? > > Or, If you have a tri-gear, could you send me the specks of the tire, > tube, > > wheel and axel? > > > > You my reply off the net to [email protected] > > > > Rick Collins, N886KR Heath Built "Little Beast" > > > > > > > > > > _______________________________________ > > to UNsubscribe from KRnet, send a message to [email protected] > > please see other KRnet info at http://www.krnet.org/info.html > > > > > > _______________________________________ > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html >
