Thanks. Please send me some pictures to [email protected]. I have a friend that may want to buy my cowl and I was also thinking of doing it in carbon fiber to save some weight also. I was thinking that I could put the two cowl halves together, coat the inside with mold release, cover the intake and prop holes, and fill it with the two part foam to make a plug that I could use for the carbon fiber cowl. Anyone ever done this before?
Brian Kraut Engineering Alternatives, Inc. www.engalt.com -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Joseph H Horton Sent: Friday, May 14, 2004 8:31 PM To: [email protected] Subject: Re: KR> Engine and cowling Can anyone tell me if a Corvair fits in the > normal > Rand cowl or should I sell the cowl and start from scratch? > > Brian Kraut Brian- I have mine just about finished fitting. The corvair fits in the cowl fine. I did not mill the intakes off so I will have the bumps on top. I also used Mark Langford's drawing for a prop hub which is longer than WW's. But it could be made to fit with Williams hub. I made a copy of the Rand cowl using carbon fiber and shed about 12 lbs. from stock. I can send a picture if you would like. Joe Horton Coopersburg, Pa. [email protected] _______________________________________ to UNsubscribe from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/info.html
