I wrote, > > I can't find the width (plan view) for the the spar cap of the outboard > forward spar.
Mark wrote > Those spars in plan view are the same as the KR2S plans call for, so look in > your RR plans for those numbers. Thanks, I of course found 1 15/16" x 1 7/8" x 78" for the outside forward spar caps prior to tapering. I wrote, > >I have found dimension errors (I think). Mark wrote, > Oh, really? What looks like an error in my calculations for spar width is the fact the Center Spar of 2 5/32 plus the two 3/32 faces gives you 2 11/32 width between the WAFs. Now for the Outside forward spar cap. 1 15/16 plus the two 3/32 faces, plus the 1/4" for WAFs gives you a dimension 1/32 wider than the width between the WAFs for the center section. Maybe the bend in the Waf takes up for it? This brings me to another guess. The height of the end of the outside forward spar is equal to the height of the center section spar? I'm going cross eyed trying to figure this out. HELP! Steven Phillabaum Auburn, Alabama "2 mile final for 36"
