I will have to agree with Langford that it does not matter. I also ordered mine from Wicks already laminated and they did mine vertically. I figure they know what they are doing.
Mark Jones (N886MJ) Wales, WI USA E-mail me at [email protected] Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html ----- Original Message ----- From: "Mark Langford" <[email protected]> To: "KRnet" <[email protected]> Sent: Tuesday, June 08, 2004 7:34 PM Subject: KR> Re: Spar lamination direction > Brian Kraut wrote: > > > The only thing I wouldn't do is build a spar with a horizontal glue line > > right where a bolt hole is going for the wing attach fitting. > > This question has come up several times, and I believe a search through the > archives will uncover a reply from our resident structural engineer whiz, > Don Reid. His take on it is exactly that, it doesn't matter either way, but > don't put a bolt through the glue line. I did it the way I did it because > it came from Wicks sawn such that it was obvious that this was the way it > had to go. I figured they knew what they were doing... > > Mark Langford, Huntsville, Alabama > N56ML "at" hiwaay.net > see KR2S project at http://home.hiwaay.net/~langford > > > > _______________________________________ > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html >
