If you really want dry air the best and cheapest way to do it is to install a heat exchanger between the tank and the water drier in the compressed air line. I used an old car air-conditioning condenser with about 3/8" lines in and out of it, you'll be surprised how much better the drier works using cool air rather than warm air!!!!!!!!!
Gavin Australia ----- Original Message ----- From: "Ryan" <[email protected]> To: <[email protected]>; "KRnet" <[email protected]> Sent: Saturday, June 26, 2004 10:06 AM Subject: Re: KR> Off subject - air compressor > When painting, I "crack" the drain valve so that water is being drained > while the compressor is running. > > Ryan > ----- Original Message ----- > From: "Jack Cooper" <[email protected]> > To: "Corvair engines for homebuilt aircraft" <[email protected]>; "KR > builders and pilots" <[email protected]> > Sent: Friday, June 25, 2004 11:13 AM > Subject: KR> Off subject - air compressor > > > > My air compressor is about 20 years old and seems to work fine except I'm > getting excessive amounts of moisture through the tools. Is there a good > system for removing the moisture from the air? Is my compressor just too > old? would a compressor overhall help the problem? I drain the tank and > separator often, but not every day. > > > > > > Jack Cooper > > [email protected] > > > _______________________________________ > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.710 / Virus Database: 466 - Release Date: 23/06/2004
