> >When you buy the complete turnbuckle assembly does it include the clevis pins? The A/C Spruce catalog says barrel, fork, and end but doesnt show a picture of an end. >If they arent included, which clevis pin and which cotter pin do I need for an AN 150-16S assembly? >Rick Coykendall ======================================================
Clevis pins are not included and aren't used on the KR. If you are getting the "forked" end turnbuckle you should be getting the size that takes a 3/16" bolt. Get the bolt with the drilled end, use a castle nut and a cotter pin. This could all vary of course depending on the application so get someone knowledgable to look it over and advise you. I haven't mentioned in quite some time now but information like this and MUCH, MUCH more can be found in the Tony Bingalis books available through the EAA. They are easy to read and a must for anyone building a homebuilt. Larry Flesner
