You can use the same measurement, as the difference would be negligible. I did draw the both out in CAD to check, but that comp's down (still) but the difference was way under 1°. Cheers.Peter Bancks [email protected] http://www.homebuiltairplanes.com http://canardaviationforum.dmt.net
----- Original Message ----- From: "Dene Collett (SA)" <[email protected]> To: "krnet" <[email protected]> Sent: Saturday, August 07, 2004 6:09 AM Subject: KR> dihedral > Hi Again guys > Can someone tell me what the dihedral angle is from the horizontal. I know > you set it up with 5" blocks at the tip but I am using the 5048-5045 > combination which means the wing will be a slightly different thickness at > same span. I need the angle formed by a line drawn spanwise down the > centreline of the outer forward spar and the horizontal.I suppose I could > work it out by drawing the old wing in CAD but I'm sure someone has that > information at their fingertips. > Thanks guys > Dene Collett > KR2S-RT builder > Port Elizabeth > South Africa > mailto: [email protected] > P.S: checkout www.whisperaircraft.com > > > > _______________________________________ > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html > >
