Netters,
I've had two requests in e-mails to me personally that I will throw
out to the net.
One is for lots of firewall forward pictures of the KR's at the Gathering.
While I'm sure that will happen on it's own I'll toss it out there to
make sure it's covered.
Second, I had a request for some rather extensive aircraft data that
could be put into a database. While a considerable amount of info
could be gathered at the Gathering, I see this as more of an on-line
type project. A paper form filled out would have to be scanned or
entered by hand, neither of which appeals to me. So, here is the
request or challenge:
Is there someone out there capable and willing to create a form that
can be filled out on-line and compiled in a database that can be
accessed, printed, etc., on line? I'll "cut and paste" below the general
info requested and this could maybe be added to with additional
request from netters before the form is finalized. Let's not wait for
Mark L. to say he will do it as he is MUCH to busy.
Any takers?............
Larry Flesner
=========================================================
ID NUMBER______________ Owners Name________________________
EMAIL_______________
KR type_________, stretched __ in aft, __ in fwd , wider______, Weight,
Empty_______, Gross_______
Cruise speed_______@_______ RPM, MAX Speed ________@ _________RPM
Engine type_____________________, Disp.________, Mfgr________, max RPM
Static_____/ flight______
Ignition system primary_________, secondary_________
Fuel Injector/CARB type________________________
Starter type______________
Generator type_____________
Prop Mfgr___________, Dia_______, Pitch__________
Comments_________________________
Airframe changes from prints;
Wing
structure___________________________________________________________________
_______
Landing gear
main_____________________________________________________________________
nose_____________________________________________________________________
tail
wheel__________________________________________________________________
Ailerons____________________________________________________________________
__________
Hinges______________________________________________________________________
________
Trim
Tab_________________________________________________________________________
____
Flap(s)
location____________________________________________________________
Actuation___________________________________________________________________
_________
Outer Panel
Fold/Removable______________________________________________________________
Vertical
Fin_________________________________________________________________________
_____
Rudder______________________________________________________________________
__________
Hinges______________________________________________________________________
__________
Horizontal
Stab._______________________________________________________________________
____
Elevator____________________________________________________________________
____________
Hinges______________________________________________________________________
___________
Flight Controls
Stick(s) location___________________________-
Aileron cables________ or pushrod ___________or_______________
Elevator cables________ or pushrod ____________ or______________
Rudder pedal hinged @ floor_____ or top__________
cable routing________________________________________________________
Epoxy Mfgr.___________________________
Nacelle Mfgr.___________________________
Canopy Mfgr.__________________________
Hinge Location__________________________
Latch Mechanism_________________________________
Paint Type/Mfgr._________________________
