Virg....I am confused, you are veering from the plans built KR. That is not your nature. Man, I need a beer after 8 hours of sanding and glassing my right wing today.
Mark Jones (N886MJ) Wales, WI USA E-mail me at flyk...@wi.rr.com Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html ----- Original Message ----- From: "VIRGIL N SALISBURY" <virg...@juno.com> To: <kr...@mylist.net> Sent: Saturday, August 21, 2004 7:35 PM Subject: Re: KR> KR2S > Yes, just make the sides vertical. You do not have all of the > Compound angkes to cut and can glue > without crosspieces slipping. Only one angle to cut. Make the bottom > width the same as the top width. > Forget about looks, It ain't that bad, Virg > > On Sun, 22 Aug 2004 08:42:51 +1200 Duncan <k...@chalksoft.com> writes: > > Hi Virg, > > Sorry to chip in here, but I'm interested in your comment below to > > "square > > the sides". Do you mean by this that you'd have the sides of the > > fuselage > > perpendicular? If so, I can see the benefit of (1) easier > > construction of > > the boat (2) more spcious cockpit, but what about the > > aesthetic/aerodynamic > > effects of this wider frontal area? Can the wider floor plan be > > successfully tapered forwards to produce a pleasing shape? Seems to > > me > > this might look a little 'clunky'. Interested in hearing your views > > on > > this, and in hearing the views on any others who have tried this... > > > > Regards, > > Duncan > > ===================================== > > At 11:54 p.m. 21/08/2004, you wrote: > > > > > Square the sides, Virg > > Duncan of Devonport > > KR2-S (Plans: #9792, #1184) > > Auckland, New Zealand > > http://rtfmsoft.com/kr > > The KR Database: > > http://rtfmsoft.com/kr/html/login.php > > > > > > > > _______________________________________ > > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > > please see other KRnet info at http://www.krnet.org/info.html > > > > > > > Virgil N. Salisbury - AMSOIL > www.lubedealer.com/salisbury > Miami ,Fl > > _______________________________________ > to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net > please see other KRnet info at http://www.krnet.org/info.html >
