You are probably talking about Molex connectors. You can buy the tool here: http://www.digikey.com/scripts/DkSearch/dksus.dll?Criteria?Ref=249673&Site=U S&Cat=33030778. Or give me your address and you can borrow mine and return it at the gathering.
Brian Kraut Engineering Alternatives, Inc. www.engalt.com -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Dan Heath Sent: Saturday, August 28, 2004 2:11 PM To: [email protected] Subject: KR> pin connectors and crimp tool Some instruments like EGT, CHT, and RPM, come with wires with little connectors that go on the ends of the pins that come out of the instruments. There are connector blocks that you can use to connect sets of wires together. Radio Shack sells these blocks and the connector pieces, but they don't sell the tool that will allow you to put the pin and the pin receptacle on the wire, like they are installed on the wires you get from the factory. Where is the source for these tools and connectors? "There is a time for building and a time for GOING TO THE GATHERING, and the time for building has long since expired." See you in Mt. Vernon - 2004 - KR Gathering http://KRGathering.org See N64KR at http://KR-Builder.org - Then click on the pics Daniel R. Heath - Columbia, SC _______________________________________ to UNsubscribe from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/info.html
