Dean, The pink urethane foam is the same as what I used on my stub wings http://mywebpage.netscape.com/n886mj/stub.html and I have had absolutely no problems with it. Make sure what you are getting is 2# density. If I had of had more of the pink, I would have used it everywhere, Compared to what you get from Wick's, I can not tell any difference except for the color. I also think having solid pieces for the leading and trailing edges makes life a lot easier. My trailing edges are solid and I wish the leading edges were. It sounds like you have a good thing going.
Mark Jones (N886MJ) Wales, WI USA E-mail me at [email protected] Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html ----- Original Message ----- From: "Dean Cooper" <[email protected]> To: "Ron Eason" <[email protected]>; "KRnet" <[email protected]> Sent: Thursday, September 09, 2004 8:40 PM Subject: Re: KR> Urethane Foam > KRron wrote: > > Be aware or be square. > > > Thanks Ron. This is actually the "pink" foam. They carve it out to > insulate pipe with. I'll try to get a sample and bring it to the gathering > as Ray suggested. I would appreciate any additional comments in the mean > time. Thanks. > > > Dean Cooper > Jacksonville, FL > Email me at [email protected] > See my KR project at www.geocities.com/djramccoop1/KR2_Home.html > > > > > _______________________________________ > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html >
