David wrote: > Does anyone have a number or site on how to get William Wynnes Book on > the corvair? I had been told that a '64 block would work but it has different > cylinders. Is that a bad thing? Should I find a different block to go with? > Let me know.
Visit www.flycorvair.com to find William Wynne's Corvair manual. It will be the best bang for your buck that you will spend building your airplane. The deal with the '64 is that it has thinner cylinder walls, so the heads and case need to be bored to fit the '65 and later cylinders that are far more common, but I suppose it might could be made to work. You'll also need to join the CorvAircraft list by sending an email to [email protected] , and then replying to the subsequent confirmation email. Ask that question there and you will get a definitive answer. That list is very similar to KRnet, with several Corvair experts, including William Wynne himself... Mark Langford, Huntsville, AL N56ML "at" hiwaay.net see KR2S project at http://home.hiwaay.net/~langford
