Dene,
Aircraft Spruce & Specialty has what you need. Look in their current
catalog on page 520 top left of the page "12 inch long drill bits". You
wrote:
"I want to install the WAF
s this weekend and install the
spars in the fuselage
permanently".
Install the wing stub spars first then the WAF's. The center spar
should fit so close that if you install the WAF's first, you will not be
able to slide the center spar into the fuselage.
Bob Stone, Harker Heights, Tx
[email protected]
-------Original Message-------
From: KRnet
List-Post: [email protected]
Date: 10/05/04 15:26:01
To: krnet
Subject: KR> 3/16 lomg series drill
Hi again guys
This is for the South African builders out there.
For the life of me I cannot source a 3/16 long series drillbit anywhere in
Port Elizabeth. Do any of you guys know where I can get such an animal? I
amm desperate, I want to install the WAF's this weekend and install the
spars inthe fuselage permanently.
Thanks
Dene Collett
KR2S-RT builder
Port Elizabeth
South Africa
mailto: [email protected]
P.S: checkout www.whisperaircraft.com
_______________________________________
to UNsubscribe from KRnet, send a message to [email protected]
please see other KRnet info at http://www.krnet.org/info.html
