Look at this: http://kr-builder.org/StevenLemke/index.html
There is a time for building and a time for FLYING and the time for building has expired. See N64KR at http://KR-Builder.org - Then click on the pics Daniel R. Heath - Columbia, SC See you in Mt. Vernon - 2005 - KR Gathering -------Original Message------- From: KRnet List-Post: [email protected] Date: 10/13/04 06:12:51 To: KR builders and pilots Subject: Re: KR>fitting Todds Canopy Has any one, apart from Scott Cable finished fitting a Todd's Dragonfly Canopy to a KR2. I have looked at Mark L site and Scott Cable's, My concern is ,it seems a different shape to Mark's, Is there a difference in the two Dragron fly Canopies???? Mark's web pics seem to show is canopy flatter on top, and no where near as pointed. My Canopy just does not seem to fit across the front deck, How much does need cutting from the front, or do we just throw it on the front deck like the KR plans say and glass around it.? The front of my Canopy is very pointed, and cuts across the dash panel, if I was to fit it as is, it would block out part of the panel. Or do I just pull my finger OUT and start cutting it up? ( it did cost $900.00Aust. to get it here. Phil Matheson [email protected] VH-PKR ( Phil's KR) 61 3 58833588 Australia.( Down Under) See My KR2 Building Web Page at: http://mywebpage.netscape.com/flyingkrphil/VHPKR.html See our VW Engines and Home built web page at http://www.vw-engines.com/ www.homebuilt-aviation.com/ _______________________________________ to UNsubscribe from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/info.html .
