Could you put a picture on your web site? Brian Kraut Engineering Alternatives, Inc. www.engalt.com
-----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Mark Jones Sent: Wednesday, October 27, 2004 8:47 PM To: KRnet Subject: Re: KR> Tail Wheel - Pneumatic They do not list them on their web site. As soon as I seen the tire, I knew it was what the tail draggers needed. The tire is 5" OD and I would estimate inflated it is about 3/4" diameter. they had a price of $14.95 on the tire and $9.95 on the tube. I forgot to check the hub price. This store is only a couple blocks from where I work. I can get you more info if needed or pick one up for you. Mark Jones (N886MJ) Wales, WI USA E-mail me at [email protected] Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html ----- Original Message ----- From: "larry flesner" <[email protected]> To: "KRnet" <[email protected]> Sent: Wednesday, October 27, 2004 7:28 PM Subject: KR> Tail Wheel - Pneumatic > At 01:23 PM 10/27/04 -0500, you wrote: > >A lot of you are looking for pneumatic tail wheels. Today, I found 5" > >pneumatic tires and tubes. These are used on all terrain scooters. > >Mark Jones (N886MJ) > >Wales, WI > +++++++++++++++++++++++++++++++++++++++++++++++++++++ > > Mark, > > Can you get us any closer than the web addresses you listed? I did > a search on their site and didn't find anything close. Even a search > for "scooters" came up empty. > > Thanks, > > Larry Flesner > > > > _______________________________________ > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html > _______________________________________ to UNsubscribe from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/info.html
