Derek,
From all the information I have been able to gather on this, to reduce
the floating effect when landing a KR-2, it not only requires flaps but a
belly board as well. The flaps on the KIR-2 are only from the rear spar to
the trailing edge and from the end of the wing stub to the fuselage. Really
too small to be effective however I have heard many say that the belly
boards compensate for the small flaps. I am sure there are many builders on
the net who would be glad to furnish you with the plans for the making and
installation of a belly board.
Bob Stone, Harker Heights, Tx
[email protected]
------Original Message-------
From: KRnet
List-Post: [email protected]
Date: 11/11/04 23:09:30
To: [email protected]
Subject: KR> Flaps?
Hello,
I have read mixed messages regarding flaps on the KR-2. Does the
standard kit include flaps in the plans? If so are they any good? Are
there any popular ways to improve them? Thank you.
Derek Hudeck
-----------------------------------------
This email was sent using SamMail.
Sam Houston State University
_______________________________________
to UNsubscribe from KRnet, send a message to [email protected]
please see other KRnet info at http://www.krnet.org/info.html
