I'm actually talking about the stab. It should be 30 up and 20 down. Will that be enough because I can't really change it unless I re do all the flight control rods and actuators. I would think that it should be enough being a tail dragger and all but I would just like to hear somebody else say that too so I feel more comfortable.
Thanks,Dan ----- Original Message ----- From: <[email protected]> To: "KRnet" <[email protected]> Sent: Saturday, November 13, 2004 7:06 AM Subject: Re: KR> Flight controls > Dan, > I do not think I sent you, or the Net, this E-mail. I do want to clear > up the statement > "only have 25 up and 20 down". I believe we are talking about the aileron > and it requires > 20 up and 10 down, does it not? Since not all pertinent info is in this > E-mail, I just want > to make sure I,m seeing it right. > > Thanks, Ray > > ----- Original Message ----- > From: "Dan Heath" <[email protected]> > To: <[email protected]> > Sent: Sunday, November 07, 2004 9:03 PM > Subject: Re: KR> Flight controls > > >> Don't know if that is enough for all situations and would be concerned as >> to >> why. As far as the inspector is concerned, I doubt that he will have any >> idea what it should be unless you tell him. >> >> But, again, I would be concerned why you only have 25 up and 20 down. >> >> There is a time for building and a time for FLYING and the time for >> building >> has expired. >> >> See N64KR at http://KR-Builder.org - Then click on the pics >> >> Daniel R. Heath - Columbia, SC >> >> See you in Mt. Vernon - 2005 - KR Gathering >> >> -------Original Message------- >> >> I can only get 25 up and 20 down. Will that be enough? And will the FAA >> inspector allow that to be off from the plans. >> >> _______________________________________ >> to UNsubscribe from KRnet, send a message to [email protected] >> please see other KRnet info at http://www.krnet.org/info.html > > > _______________________________________ > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html >
