They sell the same tube at an airconditioning supply house
----- Original Message ----- From: "Brian Kraut" <[email protected]> To: "KRnet" <[email protected]> Sent: Thursday, December 30, 2004 8:16 PM Subject: RE: KR> Pitot Static > You can bend 1/4" tube pretty easy without a bender. Get some of the 3003 > Versatube. You can buy a foot or two real cheap from either Spruce or > Wicks. > > Brian Kraut > Engineering Alternatives, Inc. > www.engalt.com > > -----Original Message----- > From: [email protected] [mailto:[email protected]]On > Behalf Of Glasseyegav > Sent: Thursday, December 30, 2004 6:20 AM > To: KR builders and pilots > Subject: KR> Pitot Static > > > Hi all, > Has anybody made their Pitot and static tubes from 3/8" tube?? > I have plenty of 3/8" tube and a bender to suit. > If it were to use 1/4" I'd have to source it and a bender as well!! > I was planning on making a nice tip to press fit in the 3/8" tube, to > reduce > the inlet size and make it look a little nicer. > Would this give the same results as the 1/4" tube installation?? > Would the static work the same in 3/8" tube as it does with 1/4" tube?? > > Gavin > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html >
