Brian I would try one of those traffic cones. just glue some sandpaper around
it and test it on a sample piece of foam
Mike Turner Jackson, Mo.
----- Original Message -----
From: Brian Kraut<mailto:[email protected]>
To: KRnet<mailto:[email protected]>
Sent: Sunday, February 06, 2005 10:27 PM
Subject: KR> Sanding wing fairing
I need to sand a wing root fairing foam block with about a 3" radius for
most of the length, then go to about a 12" radius aft of the wing (this will
be a Hughes Racer looking fairing). The front half before the radius
changes will be easy enough to do with a coffee can or something, but I
don't know any good way to do the changing radius on the aft side. Anyone
have any suggestions or do I just have to eyeball it and maybe use some
cardboard templates?
Brian Kraut
Engineering Alternatives, Inc.
www.engalt.com<http://www.engalt.com/>
_______________________________________
Search the KRnet Archives at
http://www.maddyhome.com/krsrch/index.jsp<http://www.maddyhome.com/krsrch/index.jsp>
to UNsubscribe from KRnet, send a message to
[email protected]<mailto:[email protected]>
please see other KRnet info at
http://www.krnet.org/info.html<http://www.krnet.org/info.html>
