Icing is an automotive filler used to fill spots and scratches that are less than 1/8" deep. It is a polyester filling putty which needs a hardener. the mix ratio is 50:1. It is stain free, tack free and exceptionally easy to sand. It is formulated for final finish over body filler, rust pits, pinholes,scratches, etc. This stuff sets in three minutes so you work small areas at a time. It spreads very easily and a small amount goes a long way. It is self leveling and fills pinholes not just covers them. You can sand this in 15-20 minutes after applying it. It feathers easier than any other filler I have tried. Made by USC (U.S. Chemical & Plastics) under part #26006. It comes in a 24 oz tube with filler for $20.00. Get it at any auto paint supply store. Try it, you will be glad you did.
Mark Jones (N886MJ) Wales, WI USA E-mail me at [email protected] Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj/homepage.html ----- Original Message ----- From: "Dan Heath" <[email protected]> To: <[email protected]> Sent: Sunday, April 24, 2005 4:02 PM Subject: Re: KR> Itching to fly. > Mark, > > Please describe what icing is and how it performs. > > See you in Mt. Vernon - 2005 - KR Gathering > See N64KR at http://KR-Builder.org - Then click on the pics > There is a time for building and a time for FLYING and the time for building > has expired. > Daniel R. Heath - Columbia, SC > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html >
