I want pics.......in flight pics. Mark Jones (N886MJ) Wales, WI USA E-mail me at [email protected] Visit my KR-2S CorvAIRCRAFT web site at http://mywebpage.netscape.com/n886mj
----- Original Message ----- From: "Mark Langford" <[email protected]> To: <[email protected]>; "KRnet" <[email protected]> Sent: Tuesday, September 13, 2005 8:55 PM Subject: Re: KR> PICS Wanted! > Cris wrote: > > > Does anyone have any picture of his workbench or workshop in general to > > share? > > Pictures? You want PICTURES? > > See http://home.hiwaay.net/~langford/05091302m.jpg and > http://home.hiwaay.net/~langford/05091305m.jpg . Mine's built like a ladder > using something similar to floor construction. I built a 2"x8" box frame > and then screwed 2"x4" stringers on 16" centers. The thing is supported by > six 4"x4" pressure treated posts, bolted to the frame with 5/16" bolts. The > top is 3/4" OSB (oriented strand board) with a quarter inch "hardboard" > (Masonite) surface screwed to it. Masonite is the dark brown stuff that peg > board is made of. It's very durable and it's replaceable, although I > haven't even thought about replacing it for 12 years now. If I get a bunch > of epoxy on it, I'll just run the belt sander over it and go on with life. > I can still see the layout of my fuselage side structure on it though. > > My bench is 16' long, but 14' ought to be fine. After I was done with the > boat, I cut it in half and put half on one wall and left the other half out > in the middle of the floor, but had to add two 4x4 legs to one of them. I > only made mine 42" wide, because 48" is too far to lean and reach the other > side. One of these days I'm going to hang one of them from the basement > floor joists and then I'll call it a "shelf". That'll make room for the > "ultimate Karmann Ghia" project. See > http://home.hiwaay.net/~langford/ghia2.jpg for a preview... > > Mark Langford, Huntsville, Alabama > see KR2S project N56ML at http://home.hiwaay.net/~langford > email to N56ML "at" hiwaay.net > -------------------------------------------------------------- > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html
