Scott Cable,
I couldn't help noticing that you are talking about a warp drive prop that
you have been donating to the KR prop bank. I wonder Scott, is this the same
prop that I purchased with the "Blue Dream" but which somehow disappeared along
with the corvair engine when I asked to have them shipped to me. I can only
surmise that it is, as I purchased a warp drive prop from you and have not
recieved it and you sold me a warp drive prop and appear to still have one. So
with that said the only thing I can see that Mark Jones needs to do is
absolutely nothing seeing how I own the prop. What goes around, comes around
Scott. Have a nice day. James Dunn
Mark Jones,
Since I haven't heard anything further about my Warp Drive Prop, I thought that
I would write you to give you the opportunity to make things right.
Prior to shipping you my prop for use in the KR prop bank, I had replaced all
of the hardware. I had the propeller hub and spinner bulkhead Dye Penetrant
inspected by a friend at work (I was working for a little aircraft company
called Boeing), to insure serviceablity of the prop for aircraft use.
Never mind the fact that the prop had been removed from a corvair powered
soneri that had been flying with no issues...Yet,You reported a vibration from
it, which you blamed on a balance issue. What is suspect is the manner in which
you mounted my prop to your airplane. I had supplied you Warp Drive's website
in numerous emails, yet the prop was way over-torqued. I also suspect that when
you assembled the prop and hub, you didn't bother assembling the proper blade
into the correct location and or re-index the prop hub halves. Can you not
follow simple instructions?
This is the condition that I recieved my prop back in:
The bolts are stripped from obviously being way over-torqued.
Missing bolts and nuts.
The bolt heads have been stripped from the use of pliers.
The prop hub has eyebrow inclusions on it where the prop attach bolts were
over-torqued.
The propeller hub has nicks / gouges on it.
The spinner bulkhead has knife edge burrs in all of the attachment holes.
I know the burrs were not there when I sent it to you as I had the prop hub and
spinner bulkhead Dye Penetrant inspected and all of the holes were de-burred
/chamfered.
This is what needs to be done:
Replace the stripped / missing hardware. Contact Warp Drive for the replacement
hardware kit.
Reimburse me the expenses required to bring the propeller hub back to
serviceable condition. I'm going to need to send the hub back to Warp Drive to
have it inspected, refaced or replaced.
Replace the Spinner bulkhead. The bulkhead is now un-serviceable because in
order to remove the knife edge burrs, the holes will get elongated and will
cause the spinner to wobble, vibrate and fail.
Please reference the email below that I recieved from Mark Langford prior to
shipping me back my prop.
Mark Langford wrote:
From: "Mark Langford"
To:
Subject: Re: Warp Drive Prop
List-Post: [email protected]
Date: Tue, 20 Sep 2005 20:40:27 -0500
Scott, I'll ship your prop back tomorrow. I never got a chance to test it using
the vibration data logger due to time constraints, and never mounted it to the
plane or did anything else with it since I brought it home from Jone's house. I
took it apart to ship it tonight and two of the nuts were stripped due to over
torquing. They were low height shear nuts, and over torqued by at least a
factor of two, so that's not surprising. Jones reported a vibration from it,
and that may have been why. I couldn't get the nuts off without drilling the
end of the bolt/nut out, but that eventually worked without damaging the hub.
I'd have put some new full height nuts in the box but my nut box is at the
airport so I had to leave them out.
Mark Langford, Huntsville, Alabama
Scott Cable
Jamestown, ND
[email protected]
---------------------------------
Yahoo! Music Unlimited - Access over 1 million songs. Try it free.
_______________________________________
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to [email protected]
please see other KRnet info at http://www.krnet.org/info.html
---------------------------------
Find your next car at Yahoo! Canada Autos
