Check out my site, links page... http://www.infinigral.com/melder/flying/KR1/links.php
At the bottom, you will see a link for bolts and drills. This is a list I compiled for various fasteners, tap drill sizes for different threads, etc.... Hope this helps someone. Matt Serge VIDAL <[email protected]> wrote: OK, thanks. That raises another question: what would "10 gauge" be? "Doug Rupert" Envoyé par : [email protected] 2005-12-06 18:59 Veuillez répondre à KRnet Remis le : 2005-12-06 18:59 Pour : "'KRnet'" cc : (ccc : Serge VIDAL/DNSA/SAGEM) Objet : RE: KR> Nuts and bolts 10 refers to the size, probably 10 gauge and 32 refers to threads per inch. Question 2 probably 12-32 which would be a machine screw not AN. Doug Rupert Could somebody well versed in the secrets of the Imperial system tell me: 1 - When a thread size is expressed at, say, 10-32, what do the "10" and the "32" stand for? 2 - The AN system starts at AN3, which is 10-32. What would be the next smaller size in the standard Imperial system? Serge VIDAL -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.362 / Virus Database: 267.13.11/191 - Release Date: 12/2/2005 _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/info.html _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/info.html ------------------------------------------------- Matthew Elder Orangeburg, SC http://www.infinigral.com/melder My Airplane Project: http://www.infinigral.com/melder/flying/KR1/
