Thanks Mark.....flying again today!!!! Some folks get to have all the fun. We are having a heat wave right now. It's 21°F and freezing rain and snow predicted for tonight.
Mark Jones (N886MJ) Wales, WI Visit my web site: http://www.flykr2s.com Email: mailto:[email protected] -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Mark Langford Sent: Thursday, December 22, 2005 8:50 AM To: KRnet Subject: Re: KR> Rudder Light Wiring Mark Jones wrote: >How did you guys route your wiring into the rudder and what type of wire >did you use? I just used the regular MS22759 white stuff, and I offset the hole in the rudder from the hole in the vertical stab spar by about 4". This makes the wire twist more than bending and gives it a much longer distance to do it in, so the fatigue is reduced a lot. It still works, if that means anything. I'm taking the afternoon off to fly to Lebanon., TN with Troy Petteway to visit a KR builder... Mark Langford, Huntsville, Alabama see KR2S project N56ML at http://home.hiwaay.net/~langford email to N56ML "at" hiwaay.net _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/info.html
