Our local Harbor Freight is selling these for $12.99. This item, among others, is on sale without a mailed flyer, to appeal to their regular customers, perhaps. It is listed on a flyer distributed within the store only. Since all the Harbor Freight flyers appear to be printed for all the stores without local information, all stores may be featuring this unadvertised sale. Check it out! I bought two. I also bought the $9.99 air die-grinder, and it works great. But it really gulps the air! I don't know if that's typical of the tool, but make sure to have plenty of air capacity if you buy one.
Jim Jernigan Steve Glover <[email protected]> wrote: I painted my KR-2 with this gun and did the strips with the mini HVLP listed on their site. It worked great and the finish didn't come out too bad. I never did polish it out. What you saw at the '04 and '05 Gathering is how it came out of the gun. Steve Glover KR-2 N902G (almost gone) AJO, Ca -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mark Langford Sent: Saturday, January 14, 2006 10:24 AM To: KRnet Subject: Re: KR> Harbor Freight RE: http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=47016 I don't know about the HVLP part, but that gun is a bargain just about any way you look at it. I've been using one for all of my primer work and little touchup jobs, and I have no complaints. I even painted the bottom of my plane with it. It came out a little dry, but I'm pretty sure that was my fault, not the gun's. The guy at the local community college loves them too, but also calls them "primer guns". He uses a $400 paint gun though, so you have to consider the source. Dan's plane was done with the Harbor Freight gun and it looks great, although he did have to polish it out (may have been pilot error like my paint job though). I think in the right hands, or with a little experience, this gun would work just fine. I should also mention that I have two DeVilbiss guns, an older one from Sears and a newer one that I used to paint my Scirroco with, and will paint the top of my plane with, so I may be talking out of both sides of my mouth here. But if money were a primary concern, I'd jump all over this thing. In fact, I'm going to pick one up on Monday in case I accidently leave some paint in the one I have or something... Mark Langford, Harvest, AL see homebuilt airplane at http://www.N56ML.com email to N56ML "at" hiwaay.net _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/info.html _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/info.html
