Extra set of drawings. I think it uses the GAW airfoil, Virg On Thu, 16 Feb 2006 13:28:57 -0600 Bart Ferguson <[email protected]> writes: > > I believe I smell a good idea brewing here. Anyone feel like > > building a set of solid core stub and outer wings with the new > airfoils? Say > > 5048 stub and 5045 outer. A coat of slurry and these babies could > allow us > > to knock off vacuum bagged pre-molded skins of whatever material > the > > prospective buyer should choose. Same for the horizontal > stabilizer. > > Doug Rupert > > Simcoe Ontario > > Why take all the fun out of building? Sanding should be > appreciated. > > On a more serious note has anyone here built a set of 1B wings? As > far > as I know there is only one 1B variant in progress in Finland and > the > builder hasn't updated his site in quite a while. Definitely > planning on > going with CF for more tortional strength along a longer outer > wing. > Does anyone know how many B variants have been built besides Ken's > original? Seems the data was taken from the first one built and > there > isn't much to go on other than a few pages. The focus would be > building > the transition from a 5048 main spar to the airfoil used on the > outer > wing and obviously the technique to build it. Is there a separate > construction manual for the 1B or is the addendum simply a set of > drawings? > > Bart Ferguson > location in the addy > > _______________________________________ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html > >
Virgil N. Salisbury - AMSOIL www.lubedealer.com/salisbury Miami ,Fl
