Yes, you would squeegee it on the foam before you made the lay up. BUT, you would want the micro to still be wet when you laid up the glass. In fact, the micro should always still be wet on any lay up where micro is used.
Mark Jones (N886MJ) Wales, WI USA E-mail me at [email protected] Visit my NEW KR-2S CorvAIRCRAFT web site at www.flykr2s.com ----- Original Message ----- From: <[email protected]> To: <[email protected]> Sent: Monday, April 10, 2006 7:47 PM Subject: KR> micro2 > Hi, > > Thanks for all the info..... so If I was building my fuselage like Mr. > Eduardos' then I will want to use micro on the whole fuselage then too? > > > David Swanson > [email protected] > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html
