Bob, I did most of the same as Mark posted except that I used a dowel with sand paper wrapped around to shape the inside radius and kept fitting the elevator. After it was shaped and extra clearance for paint I laid up one layer of the regular KR cloth on the inside radius and to the skins that were left on the trailing edge of the spar. This made a very still gap seal. Joe On Mon, 17 Apr 2006 21:35:19 -0400 "Bob Glidden" <[email protected]> writes: > Netters > Doe's anyone have a good way to form the inside radii on the back of > the horizontal,the one the elevator rides in,with out breaking the > corners off when done.Or how do you make the corners strong enough > to glass??.. > > > Bob Glidden > Eminence,Indiana > KR2S N181FW (building) > Corvair 110 > [email protected] > _______________________________________ > Search the KRnet Archives at > http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html > >
Joe Horton, Coopersburg, PA. [email protected]
