Chris: The plans should have drawings for the WAF's but mine does not have the diameters spelled out for the aft spar holes but they are AN-3 bolts. You should be able to get the dimensions of the grip diameters from an AS catalog but beware of tolerances as the WAF's on my bird are undersized for the bolds I got by a few thousandths and need enlargement so as not to be an interferance fit. Probably need to give a look at a good "Fits & Clearance" table and go from there--- With CARE.
Don ------------------------------------------------------------------------ Chris Johnston wrote: > I am on the scrounge for parts, I need some undercarriage fittings, the > Diehl ones for fitting to the spars, if anyone has an old or disused set I > would be interested, is the length of the kr2 gear legs the same as the > length of the kr2s, and can you make the legs from Aluminium, failing all > that, it might be safer just to buy the complete Diehl gear set and be done > with it, and yes, I have been very bad in that I have not checked the > archives on this. > I am also wanting wing attachment fittings, I would think it would be > pretty easy to make thses at home, send a cad file to the CNC water jet guy > and have them cut out, I am told they can do them here to +/- 2 thou, will > the bolt holes need reaming? and what s the best way to do this, fit them in > a jig and do them all in one or do them individually????? Any advice greatly > appreciated, and yes, again, I have not checked the archives. > > > > Chris Johnston > > North Richmond > > Australia > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html
