>-----Original Message----- >From: [email protected] [mailto:[email protected]]On >Behalf Of Chris Johnston
> just out of curiosity, I have also experimented with removing peel ply when the resin is cured and when its still green, >if you pick just the right time when its green, it peels off very easy, but I tend some times to get some light spots which >look like the glass has pulled a way from the foam, is this what happens if you remove the peel ply too soon??? Chris, I would let the epoxy completely cure before removing the peel ply. You are most likely separating the glass from the foam pulling it still wet and causing the light spots. When removing the peel ply, try your absolute best to keep your hands against the surface of the cured glass as you pull the peel ply off. This will keep the lifting force from happening as you peel the peel ply off. Hope this is clear. Mark Jones (N886MJ) Wales, WI Web site: www.flykr2s.com Mailto:[email protected]
