I am forwarding this to the Net so if any of you would like to take John up on his offer of free foam you should contact him direct and make arrangements.
Mark Jones (N886MJ) Wales, WI Visit my web site: www.flykr2s.com E-mail: [email protected] ----- Original Message ----- From: "jbfjr" <[email protected]> To: <[email protected]> Sent: Tuesday, July 25, 2006 9:05 PM Subject: Baltek foam core > Mark, > > You might remember me from the Corvair net as you have responded > to a couple of my questions. I'm building a GN-1 / Corvair and > don't need the Baltek foam core sheets that my son left me from an > abandoned boat project. I don't know if it's applicable to > aircraft but I thought I'd email you so I didn't have to subscribe > to the KR2 net. I only want to get rid of it and will give it to > anyone who will pay for shipping. > > There are 4 sheets: three are 24" x 42", the fourth is 24" x 27". > The material is a green foam, 1/2" thick and are individual > squares with a fiberglass cloth backing, each individual square is > 1-5/8" x 1-7/16". I don't think it would cost more than $15 or > $20 to ship. If you think it might be of interest to the > composite builders, please post it on the appropriate net and feel > free to give my email address to anyone that might be interested > in this stuff. > > I'd also like to take this opportunity to thank you for sharing > your knowledge and experience about the Corvair...hopefully I'll > be able to meet you at one of the gatherings someday, and > hopefully I'll be flying my Aircamper! > > Regards, > John Franklin > Richmond, TX 77469 > > ________________________________________________________________ > Sent via the EV1 webmail system at mail.ev1.net > > > >
