The equivalent foam version would cost about $100 for foam sheet, foam block would be about $400-$500 if not more if used, $40 dollars for resin and about $150 for glass and peel ply, so about $300 -------------------------- Chris & netters I spent $10.00 on a large second hand sheet of 6 inch White foam. shaped it, used about $10.00 of Polyester resin, and two or three ? layers of cloth, then glassed in two ribs and back bone brace .Has two piano hinges, and now two windows so I can see the tail section, Roll over section at front ( NO FOAM in the glass work) Just like Scott Cables design weighs 4 kgs , 8.8lbs unpainted cost almost nothing,
Built as per Scott Cable at Dan's web http://krbuilder.org/ScottCable/index.html Cheers Phil. Phil Matheson VH-PKR [email protected] 0358833588 Australia Web Page http://www.philskr2.50megs.com/ See VW Engines http://www.vw-engines.com/ www.homebuilt-aviation.com/
