Steve wrote: > gentlemen, is it wise to drill all the holes in the outer rear spar > fittings , then add the 3degree bend. or is it helpful to only drill > the attachment holes that go into the timber, add the 3* bend, and > wait till lining up the spars then drilling the pivot bolt hole?
Bend the WAF first before drilling any holes, for sure, then clamp in place until you get everything jigged up perfectly, then drill them all at once, bolting as you drill to make sure nothing slips in the process... Mark Langford, Huntsville, Alabama see KR2S project N56ML at http://home.hiwaay.net/~langford email to N56ML "at" hiwaay.net --------------------------------------------------------------
