> > I was curious.... poly-tak..... is that what I should use between my >foam and fiberglass? Im building just like Edwaurdo from Chile.... >no side wood >at all, just foam. Ive heard of doing the "hard shell" slurry over the foam >to seal it then fiberglass over it but never heard of this POLY-TAK. What way >do you think would be better of covering the plane? Any info is good info. >David Swanson ________________________________________________________________________
David, Poly-tak and foam / fiberglass are two different ball games. It sounds to me like you are venturing well beyond your knowledge and experience base and for your own safety you need to step back and ask yourself why. You won't gain all the knowledge here on the KRnet that you need to go the construction route you intend to go. Self educating and testing will take you more time than building the fuselage to plans. Do you want to build or due you want to fly? Only you can answer that. Adventures like you are about to set out on is one of the main reasons that many homebuilts never get finished or fly. If you want to fly, stick closely to plans. If you want to experiment / build, go for it but do so safely by educating yourself and have a good test plan to prove any changes you make. Good luck with whatever decision you make. Larry Flesner
