I used bungee cords to hold mine in place. Use rope to go around the rear of the fuselage and tie the bungee cords to the rope. On the top outer corners, use bar clamps to hold the firewall in place so it will not slip as it cures or you could use a couple of long finishing nails to hold it in place and then remove the nails.
Mark Jones (N886MJ) Wales, WI My Web site: http://www.flykr2s.com/ Mailto:[email protected] -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of [email protected] Sent: Tuesday, December 19, 2006 7:58 AM To: KRNET Subject: KR> Firewall attaching I have searched the archive but did not find what I was looking for so here it goes. What is the best way (Or the way you did it) to hold the 1/4" plywood firewall in place firmly against the fuselage while to glue sets up? Steven Phillabaum KR2S; 5048; corvair; Auburn, Alabama _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/info.html
