Nick,
First let me say that my plans are all packed away as I am in the process of 
moving. With that said, I can not look at the plans for exact measurements. 
>From what you say, I am presuming you are laying out your fuselage longerons 
and vertical supports. Have you drawn the lay out on your table top? If not 
you should do so and make the dimension exactly as the plans call for if you 
are making a stock fuselage length KR-2S. There is absolutely no need to 
modify the dimensions between the top and bottom longerons. Making the 
fuselage longer is a modification only you can decide if you need to do it. 
You must remember that every modification you make will add considerable 
build time to your plane. There is nothing wrong with the 2S drawing 
dimensions. You are not real clear what you are asking when you refer to 
"then back to 20 after the next gap". What are you trying to say here. Are 
you referring to the gap between the two verticals at the main spar and rear 
spar? Please try and be more precise in your question so we may answer you 
correctly. Again, the fuselage sides are very simple  and are not rocket 
science. If you do as the drawings say, you will be ok.

Mark Jones (N886MJ)
Wales, WI
Visit my web site: www.flykr2s.com
E-mail: [email protected]
----- Original Message ----- 
From: "Nick Brennan" <[email protected]>
To: "KRnet" <[email protected]>
Sent: Friday, March 16, 2007 7:26 PM
Subject: Re: KR> Hmmm - build question


> No advice?  I've stopped building temporarily to make certain that I have
> this right before I get way into it and learn that I screwed up.
>
> I'd like to get started again this weekend.
>
> Nick Brennan
> [email protected]
> ----- Original Message ----- 
> From: "Nick Brennan" <[email protected]>
> To: "KRnet" <[email protected]>
> Sent: Thursday, March 15, 2007 6:58 PM
> Subject: KR> Hmmm - build question
>
>
>>I got my plans earlier this week (I spoke to and apologized to Ms. Rand,
>> btw), and now, I've got a question, which has come up over a post in the
>> forums.
>>
>> This is a KR2S if it matters:
>>
>> The top and bottom longerons need to be 16.25 inches from each other at
>> the
>> front, 20 inches from each other after the wing spar, 20.25 at the next
>> support, then back to 20 after the next gap (I don't know what it is for
>> yet), then 19, etc. Is that correct?  If so, should I actually place them
>> that far apart or should I make them further apart?  I have bent one side
>> down, and it looks awfully small, and someone in the forums mentioned 
>> that
>> they need to be bigger, but I was curious how much.
>>
>> Nick Brennan
>> [email protected]
>>
>>
>> _______________________________________
>> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
>> to UNsubscribe from KRnet, send a message to [email protected]
>> Post photos, introductions, and For Sale items to
>> http://www.kr2forum.com/phpBB2/index.php
>> please see other KRnet info at http://www.krnet.org/info.html
>
>
> _______________________________________
> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
> to UNsubscribe from KRnet, send a message to [email protected]
> Post photos, introductions, and For Sale items to 
> http://www.kr2forum.com/phpBB2/index.php
> please see other KRnet info at http://www.krnet.org/info.html 


Reply via email to