Since the KR2 that I have is not really suited to be a 2 person plane in my
case, I'm just going to reconfigure it as a single seater. Now I can afford
a bit of extra weight in the wings, so the H series foam density isn't as
troubling to me.
I believe using the H60 series sounds like the best course to take. I
appreciate you steering me in this direction!
Glenn
----- Original Message -----
From: "Larry H." <[email protected]>
To: "KRnet" <[email protected]>
Sent: Saturday, October 18, 2008 10:32 AM
Subject: Re: KR> Wing Skin Reinfrocement/DIVINYCELL FOAM CORES
I just realized in looking at the spec sheet again comparing the H to the
HT. The H has a minimum forming temperature of +200 degrees F and the HT has
a minimum of +280 degrees F. The H 30 has a 2.3lb density, H 45 has a 3lb
density (thats per cubic foot) and the H 60 has a 4lb density.
Larry H.
________________________________
From: Martek Mississippi <[email protected]>
Subject: Re: KR> Wing Skin Reinfrocement/DIVINYCELL FOAM CORES
Larry,
I looked at the Wicks and Aircraft Spruce online catalogs. They carry
the H but not the HT series.
_______________________________________
Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp
to UNsubscribe from KRnet, send a message to [email protected]
please see other KRnet info at http://www.krnet.org/info.html
