To all of you who have used "micro" consisting of epoxy and glass balloons for smoothing and filling the wing surfaces, a question:
Mix to a consistancy like tooth paste. It sands easilly too. ----- Original Message ----- From: "Neal Hornung" <[email protected]> To: [email protected] Sent: Sunday, September 26, 2010 6:38:45 AM Subject: KR> Micro Mix To all of you who have used "micro" consisting of epoxy and glass balloons for smoothing and filling the wing surfaces, a question: What ratio are you using when you mix up the micro so it will apply evenly and smoothly? Are you mixing a "Slurry" of about a 1:1 ratio of glass bubbles to epoxy, a "Wet Micro" using a ratio of 2 to 4 parts glass balloons to 1 part epoxy, or a "Dry Micro" which is more like a spreadable paste? I'm going to be mixing some and need some advice so I can get the best mix to fill and smooth the wing surfaces for (easy?) sanding and then using primer/filler. Thanks for any help or advice. Neal Hornung [email protected] EarthLink Revolves Around You. _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/info.html
