"What different types of Header tank hold downs are being used in the KR?"
I am using a single aluminum header tank for simplicity reasons. My tank spans from top longeron to top longeron and is rather uniquely shaped on the back side due to instruments and radios. It also has a bend in it to accommodate the forward shelf and extends to the aft side of the fire wall. With this shape and the added internal baffles I just added a gusseted 1 1/4" x 1 1/4" x 1/8" angle to each end and bolt this down to my top longerons. The tank holds 21 gallons and is very stout. I have a separate forward turtle deck that covers the tank with four screws on each side so I can easily remove it for access or maintenance. Stephen Teate Composite Cooling Solutions, L.P. 4150 International Plaza, Suite 500 Fort Worth, Texas 76109 817-708-9140 ************************************************************** The information in this email is confidential and may be legally privileged. If you are not an intended recipient, you should delete this message. Access to this email by anyone else is unauthorized, and any disclosure, copying, distribution or action taken or omitted in reliance on it is prohibited and may be unlawful. **************************************************************
