Hey Phil I am working on my HS at the moment as well. This is the link to my construction page (which will be updated in the coming week) which shows how I set up the rib and spars.
http://www.kiwikr.co.nz/221horistab2.html And if you look at the seventh photo down in the page link below you will see an example of how a weight can be attached to the HS as per an RV-6A. http://www.kiwikr.co.nz/085_02_sportavex1.html Also Darren Crompton's elevator page is definately worth a look. http://www.kr-2s.com/elevator.html Hopefully these might be of some use. Cheers Gavin On 26 April 2011 09:50, phillip matheson <[email protected]>wrote: > Hi guys. > I am about to finally sand the foam on my KR2SS H/S and elevator. > But considering a slight change and place weights on the elevator tips this > time and not internal as I did last time as per Mark Langford design. > > Any photo's out there of the rib spar design on web pages etc, I can find > would be a great help. > > Very quiet on the net, or am I not getting all emails again. > > Only received 1 email, Larry Flesner re EAH over night here down under. > strange. > Phil Matheson > SAAA Ch 37 > http://www.philskr2.50megs.com/ > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html > > > _______________________________________ > Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp > to UNsubscribe from KRnet, send a message to [email protected] > please see other KRnet info at http://www.krnet.org/info.html >
