In laymans terms, if I was using one measured cup of resins, what would be a good ratio for the hardener? in cup terms, 4 instance a little over a quarter cup? On Oct 11, 2011 7:31 AM, "Brian Coss" <briancossdul...@gmail.com> wrote:
> Sorry,still learnin how to use a web site, I layd up the wings,is the > racial the same for over the fiberglass? Thx > On Oct 11, 2011 7:19 AM, <da...@windstream.net> wrote: > >> First, you need to remember to change the subject when you are changing >> the subject. Your question had nothing to do with "Wingspan". I almost >> deleted it because I have read enough about wingspan. >> >> The ratio for mixing AeroPoxy is 1 resin to .27 hardener. For sealing the >> foam with the Micro mixture, put in enough Micro to have it pour about like >> honey. If you get it too thick, it will start rolling up the foam if you >> get that, just put in a little more epoxy and keep on going. >> >> ============= >> Hi,i have a gal. Of aeropoxy& a quart of hardner&two pounds of micro >> ballons, I have to finish my wings, what is the ratial for mixing them? >> >> >> >> _______________________________________ >> Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp >> to UNsubscribe from KRnet, send a message to krnet-le...@mylist.net >> please see other KRnet info at http://www.krnet.org/info.html >> >
