Thanks for your input Joe, I remember reading somewhere on WW site that the 32 would be ok for a stock corvair. The carb came with a kr2s project I had purchased and if it doesn't work out I will do something else. Thanks for the heads up on the vent being near the exhaust stream. I will check that when I get the engine on but shouldn't be a problem. That is a good note for the rest of us builders out there.
Thanks again, Steven Bedford Kr2s -----Original Message----- From: joe.kr2s.buil...@juno.com Sent: Tuesday, November 22, 2011 4:21 PM To: kr...@mylist.net Subject: Fw: Re: KR> Fuel tank pick up and vent Steven, I have many memory lapses, Is the 32 mm the recommended size - for some reason I thought it was the next size up, I run the 38 mm with pretty good success on a 3100 cc.Mine did not come out the bottom of the fuselage with the vent just to make sure that if fuel came out the vent it didn't get into the hot exhaust stream.For your consideration,Joe Horton
