Dan, As Mark Jones mentioned, I also noticed the same. I did not see a clearence between the spinner and the prop. I noticed it because way back when, I got dinged on that by the FAA examiner inspector whatever you call em and I had to correct it.
Again, Mark is right about it . The spinner will cut into your prop. Even with just a few hours on mine at the time, there were cut marks on my prop. It all looks great on your wheels, pants and spinner. Nice job. Jeff York Georgetown Scott County FAA airport of the year 2010 KR Gathering Peoples Choice, Best Interior 2011 Air Fest Best Experimental, Best Instrument Panel Sent from my HTC smartphone on the Now Network from Sprint! ----- Reply message ----- From: "Mark Jones" <[email protected]> To: "KRnet" <[email protected]> Subject: KR> Wheels And Brakes List-Post: [email protected] Date: Mon, Jan 2, 2012 9:50 am Dan, Very nice looking pants. I was also looking at your spinner and noticed how nice that looks too. However, it is hard to see any clearance between the prop and the spinner on the cutout on the face of the prop. Is there a clearance there? If not, the spinner will cut into the prop. Just thought I would check. ----- Original Message ----- From: "Dan Heath" <[email protected]> To: "'KRnet'" <[email protected]> Sent: Monday, January 02, 2012 6:07 AM Subject: KR> Wheels And Brakes Mark Jones (N886MJ) Stevens Point, WI E-mail: [email protected] Web: www.flykr2s.com _______________________________________ Search the KRnet Archives at http://www.maddyhome.com/krsrch/index.jsp to UNsubscribe from KRnet, send a message to [email protected] please see other KRnet info at http://www.krnet.org/info.html
