Here is what I did using a Walmart driving lamp.  These are 50 watt lamps. 
The fixture has a built-in reflector.
The intended landing light fixture was barely fitting in the opening. On 
checkout, found the filament on the bulb to be open circuit. The replacement 
bulb at Walmart was $18. A new set of two lamps, fixtures and accessories 
was $17. The lamp fixture was a third the size of the old one. So, I bought 
the whole new set. Then had to fill in the cut out in the inside of the wing 
skin to mate with the now flat pedestal for the new fixture. Used cotton 
flox epoxy with a waxed wooden plug for the 5/16 ss bolt hole through the 
wing. Drilled a 5/16" hole through the new bracket to use the 5/16" ss stove 
bolt with nylon lock nut. Now have a spare lamp with fixture. If the lamp in 
the right wing fails, then I will put in the new fixture and lamp.

Sid Wood
Tri-gear KR-2 N6242
Mechanicsville, MD, USA
smw...@md.metrocast.net



Reply via email to