And T-88 already comes in convenient squirt bottles with nozzles on the top. If you're going to weigh each batch anyway (and you should), there's no need for a pump anyway. This stuff is really thick, and one of the two gets very thick with age (the darker of the two), so it can take a while to get it out of the bottle even with the squirt bottle.
Another thing to know about T-88 is don't clamp it up tight and squeeze it all out of the glue joint. Apply to both surfaces, allow to sit a few minutes to soak deeper into the wood, and then clamp lightly. C-clamps are not required. Think rubber band or other fairly light clamping pressures. There are lots of examples of how people do this, especially for fuselage frame members and spar parts, located on the various builder's pages at www.krnet.org . Mark Langford, Harvest, AL ML "at" N56ML.com www.N56ML.com _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
