nice panel Larry, boy wera you able to cram a lot of instruments in it. Beats the heck out of mine barely fitting an altimeter, airspeed indicator and wet compass, and a few engine instruments.
Todd Spanaway, WA Click on the link https://www.dropbox.com/s/1vajeb0u48h0aio/IMG_8717.JPG?dl=0 Enlarge the photo. There are three spots where you can see the wrap, left side just above spar on fuel line, right side crossing spar on fuel line, and right sidewall a short section on brake line. -----Original Message----- From: Larry Flesner via KRnet <[email protected]> To: KRnet <[email protected]> Cc: Larry Flesner <[email protected]> Sent: Wed, May 17, 2017 6:09 pm Subject: Re: KR> Brake cylinders > What did you use as a spiral tube protector? Â > I tried using springs but they were too big or > too small. Â Did you find one that works? +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Click on the link https://www.dropbox.com/s/1vajeb0u48h0aio/IMG_8717.JPG?dl=0 Enlarge the photo. There are three spots where you can see the wrap, left side just above spar on fuel line, right side crossing spar on fuel line, and right sidewall a short section on brake line. You can install on line without breaking any connections by starting one end and then just twist in on. Not sure where you'd find it now days. I had some left over from Xerox 17 years ago. Larry Flesner _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected] _______________________________________________ Search the KRnet Archives at https://www.mail-archive.com/[email protected]/. Please see LIST RULES and KRnet info at http://www.krnet.org/info.html. see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change options. To UNsubscribe from KRnet, send a message to [email protected]
