I can't speak to your mounting questions, but the Dynon AOA on my MII was
installed by a previous owner, and it's never worked. After several attempts
to calibrate it, I gave up. My FlightDek 180 is on its way back to me from
Dynon after being recalibrated, so I'll give it one more try next week. If it
works, I can send along the measurements you requested if you still want them.
Bob BlakeSalisbury, MD
On Saturday, February 10, 2018 03:32:35 PM EST, John
Bouyea via KRnet <[email protected]> wrote:
I know a few of us have Dynon equipment installed. I have a D6 in N5391M.
I'm working on another project now and want to install a Dynon AOA probe.
Questions:
*How far aft of the leading edge and how far out on the wing panel did you
mount yours?
*Is the probe parallel with the bottom skin surface?
*Did you have any issues and have to relocate it to improve accuracy?
Thanks.
John Bouyea
N5391M/ KR2
OR81/ Hillsboro, OR
2015 KR@MMV Gathering CoHost
2015, 2016, 2017 & 2018 KR Gathering Web Guy
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/[email protected]/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to [email protected]
_______________________________________________
Search the KRnet Archives at https://www.mail-archive.com/[email protected]/.
Please see LIST RULES and KRnet info at http://www.krnet.org/info.html.
see http://list.krnet.org/mailman/listinfo/krnet_list.krnet.org to change
options.
To UNsubscribe from KRnet, send a message to [email protected]
